Lincy Pyl

Algemene informatie

Voornaam: 
Lincy
Naam: 
Pyl
Lokaal: 
Kb 1.07
Telefoon: 
02/6292920
Fax: 
02/6292928
E-mailadres: 
lincy.pyl@vub.ac.be

Trefwoorden

Constructieve analyse, statische/dynamische analyse, lichtgewicht constructies, staalconstructies en staal-betonconstructies, verbindingsontwerp, experimentele-numerieke modellen (inverse methoden)

Carriere

Professor Burgerlijke Bouwkunde
Doctor in de Toegepaste Wetenschappen

Cursussen

-          Multidisciplinary project
-          Ontwerpen van constructies
-          Stage bouwkunde

Onderzoek

De ervaring binnen het vakgebied van de constructieve analyse is te situeren in de domeinen:

1. Het ontwerp van constructies die voldoen naar sterkte en stijfheid, rekening houdend met globale en lokale stabiliteit (knik, kip, plooi) en toelaatbare doorbuigingen. Toekomstig onderzoek van de groep richt zich oa op het ontwerp en de optimalisatie van lichtgewicht constructies met inbegrip van verbindingsontwerp.

Het rekentechnisch onderbouwen van het architectonisch ontwerp maakt intense samenwerking tussen de onderzoeksgroepen MeMC en ARCH mogelijk.

2. Materiaalkarakterisatie:

Een optimaal ontwerp vergt oa een juiste materiaalkeuze en een gedegen kennis van de mechanische eigenschappen. De groep beschikt over expertise in het ontwikkelen van nieuwe materialen en de bepaling van de materiaaleigenschappen aan de hand van experimentele-numerieke modellen (inverse methoden). Kennis van het gedrag van materialen bij verschillende temperaturen (omgevingstemperatuur, brand, in warmtebeïnvloede zone bij lassen, tijdens thermisch verzinken,…), hardening effecten, lange termijn effecten (vermoeiing, degradatie, scheurvorming,…) is essentieel voor een oordeelkundig ontwerp.

U kan mij steeds contacteren voor meer informatie omtrent het onderzoek van onze groep of voor toekomstige samenwerkinsgmogelijkheden.

Publicaties

Journals: 

 

Calibration and correction procedure for quantitative out-of-plane shearography, Edition:Measurement Science and Technology , , 2015, Filip Zastavnik, Lincy Pyl, Hugo Sol, Mathias Kersemans, Wim Van Paepegem Impact factor: 1.435, impact year: 2012

Detection and evaluation of cracks in the concrete buffer of the Belgian Nuclear Waste container using combined NDT techniques, Construction and Building Materials, Volume: 78, pp: 369 - 378, published by: Elsevier, ISBN-ISSN: 0950-0618, 2015, Sokratis Iliopoulos, Dimitrios Aggelis, Lincy Pyl, Johnny Vantomme, Philippe Van Marcke, Erik Coppens, Lou Areias Impact factor: 2.265, impact year: 2015

The Quasi-Harmonic Ultrasonic Polar Scan for Material Characterization: Experiment and Numerical Modeling, Edition:ULTRASONICS, , 2015, Mathias Kersemans, Arvid Martens, Koen Van Den Abeele, Joris Degrieck, Lincy Pyl, Filip Zastavnik, Hugo Sol, Wim Van Paepegem Impact factor: 2.028, impact year: 2012

A novel ultrasonic strain gauge for single-sided measurement of a local 3D strain field, Edition:EXPERIMENTAL MECHANICS, Issue: 9, Volume: 54, pp: 1673 - 1685, ISBN-ISSN: 0014-4851, 2014, Mathias Kersemans, Klaas Allaer, Wim Van Paepegem, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

Comparison of Shearography to Scanning Laser Vibrometry as Methods for Local Stiffness Identification of Beams, Edition:Strain, Issue: 1, Volume: 50, pp: 82 - 94, published by: Wiley Publishing Ltd, ISBN-ISSN: 1475-1305, 2014, Filip Zastavnik, Lincy Pyl, Jun Gu, Hugo Sol, Mathias Kersemans, Wim Van Paepegem Impact factor: 0.619, impact year: 2012

Damage Signature of Fatigued Fabric Reinforced Plastics in the Pulsed Ultrasonic Polar Scan, Edition:EXPERIMENTAL MECHANICS, Issue: 8, Volume: 54, pp: 1467 - 1477, ISBN-ISSN: 0014-4851, 2014, Mathias Kersemans, Ives De Baere, Koen Van Den Abeele, Joris Degrieck, Lincy Pyl, Filip Zastavnik, Hugo Sol, Wim Van Paepegem

Detection and Localization of Delaminations in Thin Carbon Fiber Reinforced Composites with the Ultrasonic Polar Scan, Edition:JOURNAL OF NONDESTRUCTIVE EVALUATION, Issue: 4, Volume: 33, pp: 522 - 534, ISBN-ISSN: 0195-9298, 2014, Mathias Kersemans, Arvid Martens, Koen Van Den Abeele, Joris Degrieck, Filip Zastavnik, Lincy Pyl, Hugo Sol, Wim Van Paepegem

Errors in shearography measurements due to the creep of the PZT shearing actuator, Edition:MEASUREMENT SCIENCE & TECHNOLOGY, Issue: 8, Volume: 25, N° in volume: 085007, ISBN-ISSN: 0957-0233, 2014, Filip Zastavnik, Lincy Pyl, Hugo Sol, Mathias Kersemans, Wim Van Paepegem

Extraction of bulk wave characteristics from a pulsed ultrasonic polar scan, Edition:WAVE MOTION, Issue: 7, Volume: 51, pp: 1071 - 1081, ISBN-ISSN: 0165-2125, 2014, Mathias Kersemans, Nicolas Lammens, Joris Degrieck, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Wim Van Paepegem

Identification of the elastic properties of isotropic and orthotropic thin-plate materials with the pulsed ultrasonic polar scan, Edition:Experimental Mechanics, , 2014, Mathias Kersemans, Arvid Martens, Nicolas Lammens, Koen Van Den Abeele, Joris Degrieck, Filip Zastavnik, Lincy Pyl, Hugo Sol, Wim Van Paepegem

Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan

, Edition:Polymer testing, Volume: 34, pp: 85 - 96, published by: Elsevier, , 2014, Mathias Kersemans, Ives De Baere, Joris Degrieck, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Wim Van Paepegem Impact factor: 1.646, impact year: 2012

Pitfalls in the experimental recording of ultrasonic (backscatter) polar scans for material characterization, Edition:ULTRASONICS, Issue: 6, Volume: 54, pp: 1509 - 1521, ISBN-ISSN: 0041-624X, 2014, Mathias Kersemans, Wim Van Paepegem, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

The pulsed ultrasonic backscatter polar scan and its applications for NDT and material characterization, Edition:Experimental Mechanics, Issue: 6, Volume: 54, pp: 1059 - 1071, ISBN-ISSN: 0014-4851, 2014, Mathias Kersemans, Wim Van Paepegem, Bart Lemmens, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

The pulsed ultrasonic backscatter polar scan and its applications for NDT and material characterization

, Edition:Experimental mechanics, , 2014, Mathias Kersemans, Wim Van Paepegem, Babs Lemmens, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

Ultrasonic Characterization of Subsurface 2D Corrugation, Edition:JOURNAL OF NONDESTRUCTIVE EVALUATION, Issue: 3, Volume: 33, pp: 438 - 442, ISBN-ISSN: 0195-9298, 2014, Mathias Kersemans, Wim Van Paepegem, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

Blast performance of reinforced concrete hollow core slabs in combination with fire: numerical and experimental assessment, Edition:Fire Safety Journal, Fire Safety Journal, Volume: 57, pp: 69 - 82, eds: José Torero, published by: Elsevier, ISBN-ISSN: 0379-7112, 2013, Dimitrios Kakogiannis, Fermín Pascualena, Bruno Reymen, Lincy Pyl, Jean-Marie Ndambi Mulambula, Eric Segers, David Lecompte, John Vantomme, Ted Krauthammer Impact factor: 1.677, impact year: 2011

Design and optimization or roof trusses using morphological indicators, Edition:Advances in Engineering Software, Advances in Engineering Software, Issue: Special Issue, Volume: 62-63, pp: 9 - 19, eds: Dr. R.A. Adey, Professor A.K. Noor, Professor B.H.V. Topping, published by: Elsevier Ltd., ISBN-ISSN: 0965-9978, 2013, Lincy Pyl, Willy Patrick De Wilde, C. W. M. Sitters Impact factor: 1.092, impact year: 2011

Experimental investigation of built-up double-Z members in bending and compression, Thin-Walled Structures, Volume: 53, pp: 48 - 57, eds: J. Loughlan, published by: Elsevier, ISBN-ISSN: 0263-8231, 2012, Lincy Pyl Impact factor: 1.103, impact year: 2010

Fire safety analysis of a 3D frame structure based on a full-scale fire test, Edition:Recent research advances on thin-walled structures, Thin-Walled Structures, Volume: 62, pp: 204 - 2012, eds: J. Loughlan - Dan Dubina , Viorel Ungureanu (Guest Editors), published by: Elsevier, ISBN-ISSN: 0263-8231, 2012, Lincy Pyl, Luc Schueremans, Iveta Georgieva Impact factor: 1.252, impact year: 2011

Four-dimensional design and analysis of modular footbridges

in developing countries, High Performance Structures and Materials VI, Issue: 1, Volume: 1, N° in volume: 1, pp: 481 - 492, eds: Carlos Brebbia, published by: WIT Press Ashurst Lodge, Ashurst, Southampton, SO40 7AA, UK Tel: 44 (0) 238 029 3223; Fax: 44 (0) 238 029 2853 E-Mail: witpress@witpress.com http://www.witpress.com, ISBN-ISSN: 1746-4498, 2012, Lincy Pyl, C. W. M. Sitters

Numerical study of built-up double-Z members in bending and compression, Edition:Thin-Walled Structures, Numerical study of built-up double-Z members in bending and compression, Issue: 0, Volume: 60, pp: 85 - 97, published by: Elsevier, ISBN-ISSN: 0263-8231, 2012, Iveta Georgieva, Luc Schueremans, Lincy Pyl, Lucie Vandewalle

Conference publications: 

An ultrasonic strain gauge, Edition:7th European Workshop on Structural Health Monitoring, Issue: Nantes, France, 2014-07-08 to 2014-07-11, pp: 1925 - 1932, , 2015, Mathias Kersemans, Klaas Allaer, Joris Degrieck, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Wim Van Paepegem

Ultrasonic polar scan imaging of fatigued fiber reinforced composites, Edition:16th European conference on composite materials, Issue: Sevilla, Spain, 2014-06-22 to 2014-06-26, at Univ, , 2015, Mathias Kersemans, Ives De Baere, Joris Degrieck, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Wim Van Paepegem

A qualitative and quantitative investigation of uncracked and cracked concrete beams using Impulse Excitation and nondestructive techniques, Edition:Proc. SPIE 9062, Smart Sensor Phenomena, Technology, Networks, and Systems Integration 2014, Volume: 90620Q, ISBN-ISSN: 978-0-8194-9988-2, 2014, Sokratis Iliopoulos, Alexandros Iliopoulos, Lincy Pyl, Hugo Sol, Dimitrios Aggelis

Digital Image Correlation, Acoustic Emission and Ultrasonic Pulse Velocity for the Detection of Cracks in the Concrete Buffer of the Belgian Nuclear Supercontainer, Edition:31st Conference of the European Working Group on Acoustic Emission (EWGAE), N° of pages: 7, published by: EWGAE, , 2014, Sokratis Iliopoulos, Eleni Tsangouri, Dimitrios Aggelis, Lincy Pyl, Johnny Vantomme, Philippe Van Marcke, Lou Areias

Local stiffness identification of beams using shearography and inverse methods, Edition:Advancement of Optical Methods in Experimental Mechanics, Volume: 3, pp: 275 - 281, eds: Helena Jin, Cesar Sciammarella, Sanichiro Yoshida and Luciano Lamberti, published by: Springer, ISBN-ISSN: 978-3-319-00767-0, 2014, Filip Zastavnik, Lincy Pyl, Hugo Sol, Mathias Kersemans, Wim Van Paepegem

Synergy between structural and architectural engineering - the point of view of the structural engineer, Edition:The 2014 International Conference on High Performance and Optimum Design of Structures and Materials HPSM/OPTI 2014, ISBN-ISSN: 978-1-84564-774-2, 2014, Lincy Pyl, Tine Tysmans, Willy De Wilde, C. W. M. Sitters, Hendrik Hendrickx

Determination of the fiber direction and the C-tensor of a UD carbon/epoxy composite by means of the ultrasonic polar scan

, Edition:International Congress on Ultrasonics (ICU - 2013), Proceedings, , 2013, Mathias Kersemans, Nicolas Lammens, Wim Van Paepegem, Koen Van Den Abeele, Filip Zastavnik, Jun Gu, Lincy Pyl, Hugo Sol, Joris Degrieck

Efficient extraction of the directional wave curves from a pulsed ultrasonic polar scan experiment

, Edition:12th international conference for non-destructive testing (ICNDT12 - 2013), Proceedings, pp: 171 - 178, eds: Janez Grum and Tomaz Kek, published by: Slovenian Society for Non-Destructive Testing, published at: Ljubljana, Slovenia, ISBN-ISSN: 978-961-93537-0-7, 2013, Mathias Kersemans, Nicolas Lammens, Wim Van Paepegem, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

Pitfalls in experimental recording of ultrasonic polar scans for composite material characterization

, Edition:International Congress on Ultrasonics (ICU - 2013), Proceedings, , 2013, Mathias Kersemans, Wim Van Paepegem, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

The quasi-harmonic ultrasonic polar scan for material characterization: experiment and numerical modeling

, Edition:12th international conference for non-destructive testing (ICNDT12 - 2013), Proceedings, pp: 199 - 207, eds: Janez Grum and Tomaz Kek, published by: Slovenian Society for Non-Destructive Testing, published at: Ljubljana, Slovenia, ISBN-ISSN: 978-961-93537-0-7, 2013, Mathias Kersemans, Wim Van Paepegem, Koen Van Den Abeele, Lincy Pyl, Filip Zastavnik, Hugo Sol, Joris Degrieck

Using Morphological Indicators in Transformable Structures to Create a Kit-Of-Part Pedestrian Bridge-System, Edition:Proceedings of the International Association for Shell and Spatial Structures: BEYOND THE LIMITS OF MAN, Issue: IASS2013, N° of pages: 10, eds: J.B. Obrębski and R. Tarczewski, , 2013, Aushim Koumar, Niels De Temmerman, Lincy Pyl

Design of built-up cold-formed steel columns according to the

direct strength method, Edition: Procedia Engineerin, Volume: 40, pp: 119 - 124, published by: Elsevier, ISBN-ISSN: 1877-7058, 2012, Iveta Georgieva, Luc Schueremans, Lincy Pyl, Lucie Vandewalle

Innovative Cross-Section Shapes for Built-up CFS

Columns. Experimental Investigation, Edition:Proceedings of 21st International Speciality Conference on Cold-formed Steel Structures, eds: La Boube, published at: St. Louis, Missouri, USA, , 2012, Iveta Georgieva, Luc Schueremans, Lincy Pyl, Lucie Vandewalle

Ultimate strength of built-up CFS columns, according to the direct strenght method. Experimental validation on columns with varied boundary conditions, 6th International Conference on Coupled Instabilities in Metal Structures, published at: Glasgow, Scotland, UK, , 2012, Iveta Georgieva, Luc Schueremans, Lucie Vandewalle, Lincy Pyl

communications at international congresses / symposia not published or only available as an abstract

Calibration of quantitative shearography for use in local stiffness identification, Edition:Experimental Mechanics, Issue: 16th International conference, Campbridge UK, 2014, , 2015, Filip Zastavnik, Lincy Pyl, Hugo Sol, Mathias Kersemans, Wim Van Paepegem

Detection and Monitoring of Cracks in a Concrete Buffer from DIC and AE Measurements, Edition:Waste Management (WM) Conference, MARCH 2 - 6, 2014 PHOENIX, Arizona, USA, , 2014, Lincy Pyl, Sokratis Iliopoulos, Dimitrios Aggelis, Jun Gu, Lou Areias

Detection of early age phenomena and identification of fracture characteristics in a concrete nuclear waste container using combined nondestructive techniques, 16th International Conference on Experimental Mechanics, , 2014, Sokratis Iliopoulos, Dimitrios Aggelis, Lincy Pyl, Johnny Vantomme, Lou Areias

Damage identification of prepreg composites subject to accelerated fatigue tests., Edition:DURACOSYS -2012 September 17-19, , 2012, Lincy Pyl, Hugo Sol, Filip Zastavnik, Jun Gu, Wim Van Paepegem, Mathias Kersemans

Inital imperfections and deformation of innovative cold-formed steel columns, 5 th International Conference on Optical Measurement Techniques for Structures & Systems, published at: Antwerp, Belgium, , 2012, Iveta Georgieva, Lincy Pyl

Design and implementation by aware